Specifications

Placing Stations on Programmed Emergency

1. Contact the calling station by pressing that station’s numbered pushbutton.

The PRIORITY/LOCK LED indicator lights if the called station already has

emergency priority status.

2. Press the PRIORITY/LOCK pushbutton to change the station’s emergency

priority status. The PRIORITY/LOCK LED will either light or extinguish to

reflect the status change.

3. Press the calling station’s pushbutton again to disconnect from the station.

The PRIORITY/LOCK LED on the master flashes while any station is set to

emergency priority.

Reviewing the Stations Placed on Emergency Priority

The PRIORITY/LOCK LED flashes when the master is idle and one or more stations

have emergency priority status.

1. Press any station’s numbered pushbutton. The PRIORITY/LOCK LED lights

steadily if that station has emergency priority.

— or —

2. Press the PRIORITY/LOCK pushbutton while the master is idle. The LED indica-

tors of all stations having emergency priority light. Press PRIORITY/LOCK again

to return the master to idle.

Removing Stations from Programmed Emergency

1. Contact the station by pressing its numbered pushbutton. The PRIORITY/LOCK

LED indicator lights if the called station has emergency priority status.

2. Press the PRIORITY/LOCK pushbutton to change the station’s emergency prior-

ity status.

— or —

1. Press the PRIORITY/LOCK pushbutton while the master is idle. The LED indica-

tors of all stations having emergency priority light.

2. Press the pushbuttons of the stations you want to remove from emergency priority.

Press PRIORITY/LOCK again to return the master to idle.

ProCare 2000 Operation Manual

(Programmed

Emergency

Priority)