Operating instructions

Safety instructions
Operating manual H867 Version 00.0 - Last updated: 01/2012 5
Safety equipment may not be removed or put out of service. If this cannot
be avoided for a repair operation, the safety equipment must be refitted
and put back into service immediately afterwards.
Work on electrical equipment may only be carried out by qualified special-
ists.
The connecting cable must have a power plug approved in the specific
country. The power plug may only be connected to the power cable by a
qualified specialist.
Work on live components and equipment is prohibited. Exceptions are
defined in the specifications in DIN VDE 0105.
Missing or faulty spare parts could impair safety and damage the machine.
Therefore only use original spare parts from the manufacturer.
2.2 Signal words and symbols used
Safety instructions in the text are distinguished by color bars.
Signal words specify the severity of a hazard:
• Danger: resulting in death or serious injury.
• Warning: death or serious injury possible.
• Caution: moderate to minor injuries possible.
• Attention: damage possible.
In the case of hazards to personnel, the following symbols indicate the
type of hazard:
General hazard
Hazard due to sharp objects
Hazard due to electric shock