Operating instructions

Safety instructions
4 Operating manual H867 Version 00.0 - Last updated: 01/2012
2 Safety instructions
This section contains basic instructions for your safety. Read the instruc-
tions carefully before setting up or operating the machine. Make sure to
follow the information included in the safety instructions. Failure to do this
can result in serious injury and damage to the machine.
2.1 General safety instructions
Only authorized persons may use the machine. Every person who works
with the machine must have read the operating manual first.
The machine may only be used as described in this manual.
The operating manual must be available at the machine's location at all
times.
Also observe the safety instructions and the operating manual of the drive
motor's manufacturer.
Observe the generally applicable safety and accident prevention regula-
tions and the legal regulations concerning industrial safety and the protec-
tion of the environment.
All warnings on the machine must always be in legible condition and may
not be removed. Missing or damaged labels must be replaced immedi-
ately.
For the following work, the machine must be disconnected from the power
supply using the main switch or by disconnecting the power plug:
• Threading
• Replacing the needle or other sewing tools
• Leaving the workplace
• Performing maintenance work and repairs
Inspect the machine while in use for any externally visible damage. Inter-
rupt your work if you notice any changes to the machine. Report any
changes to your supervisor. A damaged machine may not be used any
more.
The machine may only be set up by qualified specialists.
Maintenance work and repairs may only be carried out by qualified spe-
cialists.