Operating instructions

Set-up instructions
46 Operating manual H867 Version 00.0 - Last updated: 01/2012
8.16 Sewing text
Carry out a sewing test before starting up the machine. Adjust the machine
to the requirements of the material to be sewn.
To do this, read the corresponding sections of the operating manual.
• Insert the needle.
• Thread in the needle thread.
• Thread in the looper thread.
• Wind on the looper thread.
• Insert the looper thread reel.
• Adjust the thread tension to the material to be sewn.
• Adjust the thread regulator to the material to be sewn.
• Adjust the sewing foot pressure to the material to be sewn.
• Adjust the sewing foot stroke to the material to be sewn.
• Adjust the stitch length.
• Transfer the desired quick function from the keypad to the additional
switch.
• Start the sewing test at low speed.
• Increase the sewing speed continuously until the working speed is
reached.
Risk of injury by the needle point and moving
parts.
Switch off the sewing machine before replacing the
needle, insert the thread, insert the looper thread
reel, adjust the looper thread tension and the
thread regulator.
WARNING