Operating instructions

Set-up instructions
40 Operating manual H867 Version 00.0 - Last updated: 01/2012
8.13 Fitting the control panel
Figure 43: Fitting the control panel - part 1
• Unscrew the cover on the machine arm (4) and the upper machine
cover (5).
• Screw the control panel (1) firmly onto the control panel bracket (2).
• Install the connecting cable through the cable duct (3).
Figure 44: Fitting the control panel - part 2
• Install the connecting cable (6) in the machine arm.
• Guide the cable through the hole in the table plate.
• Insert the plug of the connecting cable in the socket of the control.
CoversIf you have an additional sewing lamp to be fitted as an optional additional
component, keep the covers open until you have fitted the sewing lamp
and installed the sewing lamp cable.
• Screw the cover back onto the machine arm (4) and the upper
machine cover (5).
q
w
e
r
t
(1) - Control panel
(2) - Control panel bracket
(3) - Cable duct
(4) - Cover on the machine arm
(5) - Machine cover
y
(6) - Connecting cable