Operating instructions

Set-up instructions
Operating manual H867 Version 00.0 - Last updated: 01/2012 39
8.12 Fitting the knee lever
Submodels H867-190362-70 and H867-290362-70 have an electric knee
lever.
Submodels H867-190060-70 and H867-290060-70 have a mechanical
knee lever.
8.12.1 Fitting the electric knee lever
Figure 41: Fitting the electric knee lever
• Screw the knee lever (1) under the oil pan firmly in place under the
table plate.
• Guide the connecting cable (2) to the back between the oil pan and
the control.
• Insert the plug (3) of the connecting cable in the socket of the control.
8.12.2 Fitting the mechanical knee lever
Figure 42: Fitting the mechanical knee lever
• Fold the machine upper section back.
• Fit the transmission rod (1) in the oil pan.
• Screw the knee lever (3) rods together.
• Guide the rod (3) through the hole in the oil pan (2) and connect it to
the transmission rod (1).
q
w
e
(1) - Knee lever
(2) - Connecting cable
(3) - Plug
q
w
e
(1) - Transmission rod
(2) - Hole in the oil pan
(3) - Knee lever rod