Operating instructions

Set-up instructions
38 Operating manual H867 Version 00.0 - Last updated: 01/2012
8.10 Fitting the damper
The damper cushions the machine's weight when it is folded over.
Figure 39: Fitting the damper
• Fold the machine upper section back.
• Fasten the damper spring (2) in the oil pan.
• Connect the damper components and guide them through the hole in
the back of the oil pan.
• Screw the angle (1) firmly in place under the table plate.
8.11 Fitting the oil extraction line
Figure 40: Fitting the oil extraction line
• Fold the machine upper section back.
• Screw the felt mat (2) into the oil pan with the plastic adapter on the
right.
• Insert the tube of the oil extraction line (1) into the plastic adapter.
q
w
(1) - Screw-on angle
(2) - Damper spring
w
q
(1) - Tube of the oil extraction line
(2) - Felt mat