Operating instructions

Set-up instructions
Operating manual H867 Version 00.0 - Last updated: 01/2012 37
8.8 Fitting the setpoint device
Figure 37: Fitting the setpoint device
• Screw the angle (1) under the table plate.
• Screw the setpoint device (2) onto the angle (1).
• Pull the pedal rod (3) to the correct length:
10° inclination with pedal (4) released
• Attach the pedal rod (3).
8.9 Inserting the machine upper section
Figure 38: Inserting the machine upper section
• Screw the upper hinge parts (1) onto the machine upper section.
• Insert the upper hinge parts (1) into the rubber inlays (2).
• Fold the machine upper section down and insert it in the recess.
10°
q
w
e
r
(1) - Angle
(2) - Setpoint device
(3) - Pedal rod
(4) - Pedal
q
w
(1) - Hinge upper parts
(2) - Rubber mounts