Operating instructions

Set-up instructions
36 Operating manual H867 Version 00.0 - Last updated: 01/2012
8.6 Fastening the table plate to the frame
Figure 35: Fastening the table plate to the frame
• Place the table plate on the head sections of the inner bars.
• Screw the table plate firmly in place at the screw holes (1).
8.7 Fitting the control
Figure 36: Fitting the control
• Screw the control (2) onto the 4 screw holders (1) under the table
plate.
• Clamp the power cable of the control (2) into the strain relief
mechanism (3).
• Screw the strain relief mechanism (3) under the table plate.
q
q
(1) - Screw holes and screws
w
q
e
(1) - Screw holder
(2) - Control
(3) - Strain relief