Operating instructions

Operating instructions
26 Operating manual H867 Version 00.0 - Last updated: 01/2012
7.14 Setting quick functions at the keypad
The keys activate specific functions during sewing.
Figure 24: Keypad for quick functions
Key for sewing backwards (1):
If the key (1) is selected the machine sews backwards.
Key for the position of the needle (2):
If the key (2) is selected the needle moves to a specific position. This posi-
tion is determined individually via the parameter settings. For this, read the
service manual. On delivery, the machine setting is such that the needle
is moved up if the key (2) is selected.
Key for the start and end strips (3):
Key (3) cancels the general setting for sewing start and end strips. If strips
are switched on, pressing the key (3) disables the next strip. If no strips
are switched on, pressing the key (3) sews the next strip.
For the general setting for sewing start and end strips, refer to the manual
for the DAC Classic control.
Key for the stitch length (4):
If the key (4) is selected, the machine sews using the larger stitch length
selected at the upper adjusting wheel for the stitch length.
Key for the additional thread tension (5):
If the key (5) is selected the additional thread tension is activated.
Activating a key function:
• Press the key.
The function is activated. The key lights up.
Deactivating a key function:
• Press the key again.
The function is deactivated. The key does not light up any more.
You can transfer one of the key functions to the additional switch (7).
Select a function that you require frequently to be able to switch it on faster
while sewing.
+
+/–+/–
u
q w e r t
y
(1) - Key for sewing backwards
(2) - Key for the position of the needle
(3) - Key for the start and end strips
(4) - Key for the stitch length
(5) - Key for the additional thread tension
(6) - Screws for the assignment of the
additional switch (7)
(7) - Additional switch