Operating instructions

Operating instructions
14 Operating manual H867 Version 00.0 - Last updated: 01/2012
7.4 Threading in the needle thread
Figure 4: Thread guide on the unwinding bracket and machine arm
• Fit the thread reel on the thread reel holder (2).
• Insert the thread from the rear to the front through a hole in the guide
on the unwinding bracket (1).
• Insert the thread from the right to the left through a hole in the addi-
tional guide on the machine arm (3).
Figure 5: Threading procedure for needle thread - part 1
• Insert the thread from the rear to the front through the left hole in the
first thread guide (1).
• Insert the thread in a wavelike manner through the 3 holes of the sec-
ond thread guide (2): from top to bottom through the right hole, then
from bottom to top through the hole in the middle and finally from top
to bottom through the left hole.
• Guide the thread clockwise around the pre-tensioner (3).
Risk of injury by the needle point and moving
parts.
Switch off the sewing machine before inserting the
thread.
WARNING
q
w
e
(1) - Guide on the unwinding
bracket
(2) - Thread reel holder
(3) - Additional guide on the
machine arm
+
1234
+
–
+
–
+
–
+
–
5
6
4
+
q
w
e
r
t
y
u
i
o
(1) - First thread guide
(2) - Second thread guide
(3) - Pre-tensioner
(4) - Additional tensioner
(5) - Main tensioner
(6) - Additional screw
(7) - Thread tensioning spring
(8) - Spring tip
(9) - Tightening lever