Instruction manual

6.11 Setting the stitch length

–

Turn the button (1) so that the number (2) indicating the required

stitch length in mm is opposite the mark (3).

6.12 Starting up the manually controlled machine with a clutch motor

–

Switch on the motor (1) with a switch (2) – the drive motor operates

permanently.

–

Tread the pedal (3). The motor friction clutch gets switched and the

sewing machine starts running.

–

Regulate the sewing speed by the pressure on the pedal (3).

Dependent on this pressure, the clutch slip changes and

subsequently the machine speed as well.

–

Release the pedal (3). The sewing machine stops.