Instruction manual
EFKA AB221A/AB321A + AB222A/AB322A (BA)
95
Note
If an input is active with open contact, the corresponding arrow lights up when the contact is open. If an input is
active with closed contact, the corresponding arrow lights up when the contact is closed.
Output Test:
Select the desired output using the +/- keys
Enable the selected output using the >> key on the V810 or the incorporated control panel
Enable the selected output using the key at the bottom right on the V820
Display Assignment of the outputs
01 Backtacking on socket ST2/34
02 Sewing foot lift on socket ST2/35
03 Output M1 on socket ST2/37
04 Output M3 on socket ST2/27
05 Output M2 on socket ST2/28
06 Output M4 on socket ST2/36
07 Output M5 on socket ST2/32
08 Output M11 on socket ST2/31
09 Output M6 on socket ST2/30
010 Output M9 on socket ST2/25
011 Output M8 on socket ST2/24
012 Output M7 on socket ST2/23
013 Output M10 on socket ST2/29