Instruction manual

EFKA AB221A/AB321A + AB222A/AB322A (BA)
94
10.7 Parameter Data Editing on the Memory Stick
Parameter data is stored on the Memory Stick as a text file and can therefore be varied or extended using a text editor on
the PC. Comments can be added. The file is stored in the following format:
[EFKA FILEINFO=00000001]
F290=5 ** MIN=0 MAX=44 * Trimming mode
F291=5 ** MIN=0 MAX=19 * Selection of V810 slide-in strip



F799=0 ** MIN=0 MAX=65535 *
***** Do not change the sequence of parameter ******
*
* File created by:
* CONTROL-TYP: AB221A
* PRGNR: 5130D
* DATE: Jun 30 2005
* TIME: 09:49:41
The first line „ [EFKA FILEINFO=00000001] „ must not be changed! The parameter values may be changed. When
reading the file into the control, any text to the right of an “ * “ will be ignored. This way, the user can input any comment
whatsoever into the file.
11 Signal Test
Function with or without control panel Parameter
Input and output test (Sr4) 173
Function test of external inputs and transistor power outputs with connected actuators (e.g. solenoids and solenoid valves).
11.1 Signal Test Using the Incorporated Control Panel or the V810/V820
Input Test:
• Select parameter 173.
• Control: Functions of signals “light barrier, sensor (IPG... or HSM...), generator
impulse 1 and 2, positions 1 and 2” can be checked directly and indicated by means
of LEDs 3...8. Inputs in1...in10 are displayed individually. Several switches and/or
keys must not be actuated at the same time.
• V810 control panel: The above signals are indicated by means of arrows above the
keys 2...4. Inputs in1...in10 appear individually on the LC display. Several switches
and/or keys must not be actuated at the same time (see control).
• V820 control panel: Inputs in1...in10 and signals “light barrier, sensor, generator impulse 1 and 2, positions 1 and 2”
are displayed by means of arrows above the keys 1...10. Several inputs can be actuated and displayed at the same time.
• If several keys and/or switches are actuated at the same time, e.g. in3, in5, in6, in7, the least significant input will be
displayed, e.g. in3.
V820 Control Panel V810 Control Panel
IN3
1
IN2IN1
42 3 5 6
IN8IN7IN6IN5IN4 IN10IN9
987 0
G2
G1
+
TEST
-
KL2460
G1
G2
TEST
+
-
1 2 3 4
KL2461