Instruction manual

EFKA AB221A/AB321A + AB222A/AB322A (BA)
9
2.1 Special Accessories
Control panel Variocontrol V810 - part no. 5970153
Control panel Variocontrol V820 - part no. 5970154
Foot control type FB302B with three pedals for standing operation, with approx. 1400 mm - part no. 4170025
connecting cable and 9-pin SubD connector
Reflection light barrier module LSM002 - part no. 6100031
Hall sensor module HSM001 - part no. 6100032
Pulse encoder IPG001 - part no. 6100033
EFKANET interface IF232-3, complete - part no. 7900071
Adapter cord for the connection of the control to interface 232-3 - part no. 1113119
Adapter cord for the connection of light barrier module and Hall sensor module - part no. 1113229
HSM001 or pulse encoder IPG001, or light barrier module, Hall sensor module
HSM001 or pulse encoder IPG001 and EFKANET
Compiler C200 for programming additional functions - part no. 1113262
Adapter cord for the connection of sockets B18 each on the SM210 stepping - part no. 1113172
motor control and on the above control (see chapter “Connection Scheme of SM210A
Stepping Motor Control” in the List of Parameters)
Actuating solenoid type EM1.. (for e. g. sewing foot lifting, backtacking, etc.) - see specification
“solenoids” for
available models
Fitting piece for position transmitter - part no. 0300019
Knee switch type KN3 (pushbutton) with cord of approx. 950 mm length without plug - part no. 5870013
Adapter cord for the connection to AISIN high-speed seamer AD3XX, AD158, 3310 - part no. 1112815
and overlock machine EK1
Adapter cord for the connection to BROTHER models 737-113, 737-913 - part no. 1113420
Adapter cord with 100 Ω select resistor for the connection to BROTHER lockstitch machine - part no. 1113420
models 7xxx, B84xx, 877B, B87xx, 878B (mode 31)
Adapter cord with 150 Ω select resistor for the connection to BROTHER chainstitch machine - part no. 1112822
models FD3-B257, 25xx, 26xx, 27xx (mode 32)
Adapter cord for the connection of the position sensor incorporated in the handwheel - part no. 1113433
to BROTHER sewing machine models B721, B722, B724, B737, B748, B772, B774, B778,
B842, B845, B872, B875
Adapter cord for the connection to DÜRKOPP ADLER models 210 and 270 - part no. 1112845
Adapter cord for the connection to GLOBAL model CB2803-56 - part no. 1112866
Adapter cord for the connection to JUKI high-speed seamer with index -6 - part no. 1112816
Adapter cord for the connection to JUKI high-speed seamer with index -7 - part no. 1113132
Adapter cord for the connection of the position sensor incorporated in the handwheel - part no. 1113157
to JUKI lockstitch machines
Adapter cord for the connection to JUKI lockstitch machine model LU1510-7 and LU1521N-7 - part no. 1113557
Adapter cord for the connection to JUKI lockstitch machine model DNU1541-7 - part no. 1113557
Adapter cord for the connection of a position sensor incorporated in the handwheel - part no. 1113558
to JUKI lockstitch machine model DNU1541-7
Adapter cord for the connection to JUKI lockstitch machine models LU2210, LU2260 - part no. 1113526
Adapter cord for the connection to KANSAI machine model RX 9803 - part no. 1113130
Adapter cord for the connection to PEGASUS models W500/UT, W600/UT/MS - part no. 1112821
with or without stitch condensing
Adapter cord for the connection to PEGASUS backlatch machine - part no. 1113234
Adapter cord for the connection to PEGASUS chainstitch machine MHG-100 - part no. 1113267
Adapter cord for the connection to PFAFF models 563, 953, 1050, 1180 - part no. 1113491
Adapter cord for the connection to PFAFF models 1425, 1525 - part no. 1113324
Adapter cord for the connection to RIMOLDI model F27 - part no. 1113096
Adapter cord for the connection to SINGER models 211, 212U, 212UTT and 591 - part no. 1112824
Adapter cord for the connection to UNION SPECIAL lockstitch machine model - part no. 1112823
63900AMZ (as a replacement for the US80A)
Adapter cord for the connection to UNION SPECIAL model 34700 with stitch lock - part no. 1112844
Adapter cord for the connection to UNION SPECIAL models 34000 and 36200 - part no. 1112865
(as a replacement for the US80A)
Adapter cord for the connection to UNION SPECIAL models CS100 and FS100 - part no. 1112905
Adapter cord for the connection to YAMATO VC/VG series chainstitch machines + stitch lock - part no. 1113345
Adapter cord for the connection to YAMATO backlatch machine ABT3 - part no. 1112826
Adapter cord for the connection to YAMATO backlatch machines ABT13, ABT17 - part no. 1113205
Adapter cord for MITSUBISHI lockstitch machines for the connection of the position sensor - part no. 1113411
incorporated in the handwheel
Extension cable approx. 1000 mm long for commutation transmitter DC15.. - part no. 1113151
Extension cable approx. 1000 mm long for DC15.. line - part no. 1113150
Mounting kit for DC1500 on PEGASUS model W600 - part no. 1113125
Mounting kit for DC1500 on PEGASUS Ex/Ext - part no. 1113126
Undertable mounting kit for DC15.. - part no. 1113235
Sewing light transformer - please indicate line
voltage and sewing light
voltage (6,3V or 12V)
9-contact SubminD male connector - part no. 0504135
9-contact SubminD female connector - part no. 0504136
Half-shell housing for 9-contact SubminD - part no. 0101523
37-contact SubminD male connector, complete - part no. 1112900
Single pins for 37-pin SubminD with strand of 5cm length - part no. 1112899