Instruction manual

EFKA AB221A/AB321A + AB222A/AB322A (BA)
89
Press the F2 key.
File type and number are displayed. 
A different existing filename may be selected
using the plus / minus key.
or
Press the E key. 
A request for confirmation is displayed.
Confirm within 1 second using the E key. 
File 0100 is read in.
At the end of the reading process, READY 
will be displayed.
10.5 Comparison of Memory Stick and Control Data
The comparison of control and Memory Stick data will be explained in the following. The procedure applies to any kind of
data.
10.5.1 Programming on the Control
Press the P key.
The first PARAMETER number is displayed. 
Select parameter 512. 
Press the E key.
PcP_ is displayed. 
Press the shift key.
In case no file is found on the Memory Stick, 
there will be an error display,
or
file type and number are displayed. 
A different existing filename may be selected
using the plus / minus key.
or
Press the E key. 
A request for confirmation is displayed.
Confirm within 1 second using the E key. 
File 0100 is read in.
At the end of the reading process, if the 
data is equal, READY will be displayed.
At the end of the reading process, if the 
data is not
equal, A503 will be displayed.
F2
0100DATA.PAR
+
-
E
READ PRESS E
READY
READ DATA
E
. 0.0.0.
E
E
P
. 5.1.2.
PcP_
R d Y
+
-
E
PU-E
rEAd
A503
>>
0 1 0 0
A501