Instruction manual

EFKA AB221A/AB321A + AB222A/AB322A (BA)
87
10.4 Reading Data from the Memory Stick into the Control
Reading data into the control will be explained in the following.
10.4.1 Programming on the Control
Press the P key.
The first PARAMETER number is displayed. 
Select parameter 511. 
Press the E key.
PdL_ is displayed. 
Press the shift key.
In case no file is found on the Memory Stick, 
there will be an error display,
or
file type and number are displayed. 
A different existing filename may be selected
using the plus / minus key.
or
Press the E key. 
A request for confirmation is displayed.
Press the E key within 1 second. 
File 0100 is read in.
At the end of the writing process, READY 
will be displayed.
10.4.2 Programming on the V810
Press the P key.
The first PARAMETER number is displayed. 
Select parameter 511. 
Press the E key.
A request for pressing the shift key is displayed. 
Press the shift key.
In case no file is found on the Memory Stick, 
there will be an error display,
or
file type and number are displayed. 
A different existing filename may be selected
using the plus / minus key.
F
–
0 0 0
F
–
5 1 1
[ ° ]
.0.0.0.
E
>>
E
P
.5.1.1.
PdL_
0 1 0 0
R d Y
+
-
E
PU-E
rEAd
E
P
0 1 0 0
+
-
A501
>>
noFiLE