Instruction manual

EFKA AB221A/AB321A + AB222A/AB322A (BA)
61
▪ Display example for parameter 188 on the V820 control panel: 
Signification:
XX  Display of the level up to which the maximum speed is effective
(upper break point).
YY  Display of the level from which the maximum speed is effective
(lower break point).
AB  Display of the level set on the potentiometer.
ZZZZ  Speed resulting from the set high lift level.
EEEE  Outside of the speed range.
9.16.2 Setting the Speed Limitation Depending on High Lift with the V820 Control Panel
 Determine maximum speed (n2) using parameter 111.
 Determine minimum speed (n10) using parameter 117.
 Set parameter 126 to “3“.
 Call parameter 188.
 Press the E key. 
 Press the F2 key. 
 Set high lift for walking foot (potentiometer on the machine) to the level up to which full speed is to be maintained
(upper break point).
 New value of AB is taken over to XX. 
 Set high lift for walking foot (potentiometer on the machine) to the level from which minimum speed is to be effective
(lower break point).
 New value of AB is taken over to YY. 
 Press the P key once  Actual parameter is displayed. / Press the P key twice  Exit programming.
9.16.3 Setting the Speed Limitation Depending on High Lift with the V810 Control Panel
 Call parameter 188.
 Press the E key. 
 Press the F2 key. Actual display. 
 Press the F2 key. Previous values are displayed. 
 Press the F2 key. 
 Set new value (level) with potentiometer on the machine. 
 Press the F2 key. 
 Press the E key. New value 08 (upper break point) 
is entered.
 Press the F2 key. 
ZZZZ XX AB YY
E
F
–
188 hP [ ° ]
F2
ZZZZ XX AB YY
E
ZZZZ XX
A
B YY
E
ZZZZ XX
A
B YY
E
hP [ ° ]
F2
1 1. 3 2 0 0
F2
0 5 1 9
F2
1 1. 3 2 0 0
0 8. 3 2 0 0
F2
0 5 1 9
E
0 8 0 8
F2
0 8. 3 2 0 0