Instruction manual

EFKA AB221A/AB321A + AB222A/AB322A (BA)
6
9.41 Signals A1 and A2 79
9.41.1 Puller Function Using Signal A1 and/or A2 80
9.42 Signal “Machine Running“ 81
9.43 Signal Output Position 1 81
9.44 Signal Output Position 2 81
9.45 Signal Output 512 Impulses per Rotation 81
9.46 Actuator 81
9.47 Acoustic Signal 82
10 Data Storage via USB Port 83
10.1 USB Port 83
10.2 USB Parameters 84
10.3 Storing Data on the Memory Stick 84
10.3.1 Programming on the Control 85
10.3.2 Programming on the V810 85
10.3.3 Programming on the V820 86
10.3.4 Programming on the V850 86
10.4 Reading Data from the Memory Stick into the Control 87
10.4.1 Programming on the Control 87
10.4.2 Programming on the V810 87
10.4.3 Programming on the V820 88
10.4.4 Programming on the V850 88
10.5 Comparison of Memory Stick and Control Data 89
10.5.1 Programming on the Control 89
10.5.2 Programming on the V810 90
10.5.3 Programming on the V820 90
10.5.4 Programming on the V850 91
10.6 Data Deletion from Memory Stick 92
10.6.1 Programming on the Control 92
10.6.2 Programming on the V810 92
10.6.3 Programming on the V820 93
10.6.4 Programming on the V850 93
10.7 Parameter Data Editing on the Memory Stick 94
11 Signal Test 94
11.1 Signal Test Using the Incorporated Control Panel or the V810/V820 94
12 Error Displays 96
13 Operating Elements of the V810 Control Panel 98
14 Operating Elements of the V820 Control Panel 99