Instruction manual

EFKA AB221A/AB321A + AB222A/AB322A (BA)
5
9.15 High Lift for Walking Foot Signal Output M6 / Flip-Flop 1 59
9.15.1 High Lift Walking Speed 59
9.15.2 High Lift Walking Speed Run-Out Time 59
9.15.3 High Lift Walking Stitches 59
9.15.4 High Lift for Walking Foot Operational Mode Not Stored (Parameters 240...249 = 13) 59
9.15.5 High Lift for Walking Foot Operational Mode Stored /Flip-Flop 1
(Parameters 240...249 = 14) 60
9.16 Speed Depending on High Lift 60
9.16.1 Operating Mode of Speed Limitation Depending on High Lift 60
9.16.2 Setting the Speed Limitation Depending on High Lift with the V820 Control Panel 61
9.16.3 Setting the Speed Limitation Depending on High Lift with the V810 Control Panel 61
9.16.4 Potentiometer Adjustment on JUKI Machine Model LU-2210/LU2260 62
9.17 Speed Limitation n9 62
9.18 Speed Limitation n11 with Signal Output M10 / Flip-Flop 2 62
9.19 Disabling of Flip-Flop Functions at the Seam End 63
9.20 Bobbin Thread Monitor 63
9.21 Bobbin Thread Monitor (Modes 20 and 25) 64
9.22 Thread Trimming Operation 64
9.22.1 Thread Trimmer/Thread Wiper (Lockstitch Modes) 65
9.22.2 Trimming Speed 65
9.22.3 Activation of Short Trimmer 65
9.22.4 Chainstitch Thread Trimmer (Various Modes) 65
9.22.5 Chainstitch Machine Trimming Signal Times 65
9.23 Bag Sewing Machine Functions (Mode 5) 66
9.24 Stitch Lock Machine Functions (Mode 21) 66
9.25 Functions for Pegasus MHG-100 Machine (Mode 24) 66
9.26 Overlock Machine Functions (Mode 7) 66
9.26.1 Chain Suction Signal 66
9.26.2 Start and End Counts 68
9.27 Function of Output Signal M8 68
9.28 Function of Output Signal M11 68
9.29 Tape Cutter/Fast Scissors (Modes 6/7/15/16) 69
9.29.1 Tape Cutter/Fast Scissors in Mode 6 69
9.29.2 Tape Cutter/Fast Scissors in Mode 7 69
9.29.3 Tape Cutter/Fast Scissors in Mode 15 70
9.29.4 Tape Cutter/Fast Scissors in Mode 16 71
9.30 Manual Tape Cutter/Fast Scissors 72
9.31 Manual Stacker 72
9.32 Selection of Signals M8, M9 and M10 at the Start of the Seam 72
9.33 Seam with Stitch Counting 72
9.33.1 Number of Stitches for a Seam with Stitch Counting 73
9.33.2 Stitch Counting Speed 73
9.33.3 Seam with Stitch Counting When Light Barrier Is On 73
9.34 Free Seam and Seam with Light Barrier 74
9.35 Light Barrier 74
9.35.1 Speed after Light Barrier Sensing 74
9.35.2 General Light Barrier Functions 74
9.35.3 Reflection Light Barrier LSM002 75
9.35.4 Light Barrier Monitoring 75
9.35.5 Automatic Start Controlled by Light Barrier 75
9.35.6 Light Barrier Filter for Knitted Fabrics 76
9.35.7 Functional Variations of the Light Barrier Input 76
9.36 Switching Functions of Inputs in1...i10 76
9.37 Software Debouncing of All Inputs 78
9.38 F1/F2 Function Key Assignment on the V810/V820 Control Panels 78
9.39 Handwheel Rotation by Keystroke 79
9.40 Speed Limitation by means of External Potentiometer 79