Instruction manual

EFKA AB221A/AB321A + AB222A/AB322A (BA)
44
8.9.3 Setting the Positions on the V810 Control Panel (Parameter 270 = 0 or 6)
Do these settings whenever the encoder incorporated in the motor is used (parameter 270 = 0), or a position transmitter
mounted on the machine head (e.g. IPG pulse encoder or HSM Hall sensor) (parameter 270 = 6), whose preset values must
be adapted.
Select parameter 171 
Press the E key 
Press key >> (B key).
Display of the 1st parameter value 
of position 1
If necessary, change parameter value by pressing
key >> or +/- or by turning the handwheel 
(> 1 rotation)
Parameter value of position 2
appears on the display 
If necessary, change parameter value by pressing
key >> or +/- or by turning the handwheel 
(> 1 rotation)
Parameter value of position 1A
appears on the display 
If necessary, change parameter value by pressing
key >> or +/- or by turning the handwheel 
(> 1 rotation)
Parameter value of position 2A
appears on the display 
If necessary, change parameter value by pressing
key >> or +/- or by turning the handwheel 
(> 1 rotation)
Press the P key twice.
Settings are completed. 
Exit programming.
These values are saved when you start sewing. They remain in effect even after turning the machine off!
8.9.4 Setting the Positions on the V820 Control Panel (Parameter 270 = 0 or 6)
Do these settings whenever the encoder incorporated in the motor is used (parameter 270 = 0), or a position transmitter
mounted on the machine head (e.g. IPG pulse encoder or HSM Hall sensor) (parameter 270 = 6), whose preset values must
be adapted.
Display before programming 
A parameter number blinks 
on the display
Input parameter number 171 
The abbreviation of the parameter
appears on the display 
F
–
1 7 1
E
[ o ]
» P 1 E 1 4 0
+
- P 1 E X X X
E
P 2 E 2 6 0
P
P
A
b 2 2 0 A
+
- P 2 E X X X
E
P 1 A 0 8 0
+
- P 1 A X X X
E
P 2 A 4 0 0
+
- P 2 A X X X
1 7 F-171
1
E
F-171 Sr2
[
o
]
4000 Ab220A
P
F
–
XX
X