Instruction manual
EFKA AB221A/AB321A + AB222A/AB322A (BA)
3
CONTENTS Page
1 Range of Applications 7
1.1 Use in Accordance with Regulations 8
2 Scope of Supply 8
2.1 Special Accessories 9
3 Use of the C200 Compiler 10
4 Control Operation without Control Panel 11
4.1 Access Authorization upon Command Input 11
4.2 Programming the Code Number 12
4.3 Parameter Setting 13
4.3.1 Direct Selection of Parameter Number 13
4.3.2 Parameter Selection Using Key +/- 14
4.3.3 Changing Parameter Values 15
4.3.4 Immediate Storage of All Data Changes 16
4.4 Changing All Parameter Values at the Operator Level 16
4.5 Function Switchover 16
4.6 Direct Input of Maximum Speed Limitation without Control Panel 17
4.7 Program Identification on the Control 17
5 Control Operation with Control Panel 19
5.1 Operation of the V810 Control Panel 19
5.1.1 Code Number Input on the V810 Control Panel 19
5.1.2 Parameter Input at the Operator Level on the V810 Control Panel 19
5.1.3 Parameter Input at the Technician/Supplier Level on the V810 Control Panel 20
5.2 V820 Control Panel Operation 20
5.2.1 Code Number Input on the V820 Control Panel 20
5.2.2 Parameter Input at the Operator Level on the V820 Control Panel 21
5.2.3 Parameter Input at the Technician/Supplier Level on the V820 Control Panel 21
5.3 Program Identification 22
5.4 Direct Input of Maximum Speed Limitation (DED) with Control Panel 22
5.4.1 Setting on the V810 Control Panel 22
5.4.2 Setting on the V820 Control Panel 22
5.5 Keys for Background Information (HIT) with V810/V820 23
5.5.1 Example of HIT 23
5.5.2 Further Functions of the V810/V820 Control Panels 24
5.5.3 Special Functions of the V820 Control Panel 25
5.5.4 Disabling the Keys on the Control or on the Control Panels 25
5.6 Programming of Seams (TEACH IN) 26
5.6.1 Programming after Code Number Input 27
5.6.2 Programming without Code Number Input 27
5.6.3 Detailed Example 28
5.6.4 Inserting a Seam or Pattern 30
5.6.5 Deleting a Seam or Pattern 30
5.6.6 Execution (Pattern) Mode 31
5.6.7 Further Settings for TEACH IN 31
5.6.8 Disabling the Keys on Control Panel V820 with Activated TEACH IN 32
6 Putting into Service 33
7 Setting and Putting into Service with the Aid of the Fast Installation Routine (SIR) 33