Instruction manual
EFKA AB221A/AB321A + AB222A/AB322A (BA)
29
Set functions of seam 01:
Press the E key Seam number 01 is displayed.
Press the E key Functions can be programmed.
Press key 1 The right-hand arrow above key 1 indicates that the double start backtack is On. The start
backtack stitches must be inputted individually.
Press key 2 The left-hand arrow above key 2 indicates that stitch counting forward is On. The number of
stitches can be varied as previously shown.
Press key 6 The left-hand arrow above key 6 indicates that the sewing foot is automatically lifted in the
seam.
Press key 7 The left-hand arrow above key 7 indicates that the needle is in the down position.
1 2 3 4 5 6 7
1 2
8 9
KL2387
0
Display of seam 01 after correct function input
Set functions of seam 02:
Press the E key Seam number 02 is displayed.
Press key 2 The left-hand arrow above key 2 indicates that stitch counting forward is On. The number of
stitches can be varied as previously shown.
Press key 7 The left-hand arrow above key 7 indicates that the needle is in the down position.
1 2 3 4 5 6 7
1 2
8 9 0
KL2388
Display of seam 02 after correct function input
Set functions of seam 03:
Press the E key Seam number 03 is displayed.
Press key 3 The right-hand arrow above key 3 indicates that the light barrier operates covered
uncovered. The light barrier compensating stitches can be varied as previously shown.
Press key 4 The right-hand arrow above key 4 indicates that the double end backtack is On. The end
backtack stitches must be inputted individually.
Press key 5 Both arrows above key 5 indicate that thread trimmer and thread wiper are On.
Press key 6 The left-hand arrow above key 6 indicates that the sewing foot is automatically lifted in the
seam.
Press key 7 The left-hand arrow above key 7 indicates that the needle is in the up position.
721 3 4 5 6
1 2
8 9
KL2389
0
Display of seam 03 after correct function input
Press the P key twice Exit programming of seams.
Start sewing once The programmed data is saved.