Instruction manual

EFKA AB221A/AB321A + AB222A/AB322A (BA)
28
7.)
2
KL2381
 After having enabled stitch counting by means of key 2, the number of stitches can be varied within 2
seconds. If stitch counting has already been selected, press key 2 for approx. 2 seconds in order to vary the
number of stitches. The arrow above key 2 switches briefly.
8.) + -
KL2382
 Press key +/- immediately.
9.)
KL2383
 If key +/- is not pressed within 2 seconds, the previously input number of stitches will be displayed under the
corresponding symbol (normal display).
10.)
3
KL2384
 After having enabled the light barrier using key 3, the number of light barrier compensating stitches can be
varied within 2 seconds. If the light barrier has already been selected, press key 3 for approx. 2 seconds in
order to vary the number of light barrier compensating stitches. The arrow above key 3 switches briefly.
11.)
-+
KL2385
 Press key +/- immediately.
12.)
KL2386
 If key +/- is not pressed within 2 seconds, the previously input number of stitches will be displayed under the
corresponding symbol (normal display).
 Change to the next seam by pressing the E key once.
 Exit programming of seams by pressing the P key twice.
 Start sewing in order to save the values.
5.6.3 Detailed Example
A seam 01 with double start backtack, stitch counting forward, down position, sewing foot up, a seam 02 with stitch
counting forward, down position, and a seam 03 with light barrier, double end backtack, thread trimming, up position,
sewing foot up, are to be programmed (without code number input) under the next possible pattern number, e.g. 01.
 Turn power on
 Press the P key  Parameter 000 is displayed.
 Press key 0  Pattern number is displayed. The pattern symbol and the left-hand arrow above key 0 blink.
 Press the F2 key  Existing patterns will be deleted. If there is a 2nd pattern or more patterns, pattern number 01
must be inserted by pressing the INSERT F1 key.