Instruction manual
EFKA AB221A/AB321A + AB222A/AB322A (BA)
25
5.5.3 Special Functions of the V820 Control Panel
The example below shows quick setting of minimum or maximum values.
Select parameter 200.
Press the E key.
The set value is displayed.
Press key 0 three times.
The minimum value is displayed.
Press key 9 three times.
The maximum value is displayed.
5.5.4 Disabling the Keys on the Control or on the Control Panels
Function with or without control panel Parameter
Disabling the P and E keys on the control panels and the P key on the control (EPE) 326
Disabling the + and – keys on the control panels (EPm) 327
Disabling the E, +, - and >> keys on the control (ob) 328
The P and E keys on the control panels can be enabled or disabled using parameter 326. On the control, only the P key
can be disabled using this parameter.
326 = 0 The P and E keys are Off
326 = 1 The P key is On and the E key is Off
326 = 2 The P key is Off and the E key is On
326 = 3 The P and E keys are On
The + and – keys as well as the functions “direct input of maximum speed limitation” and “background information keys”
can be enabled or disabled on the control panels and the function “direct input of maximum speed limitation” on the control
using parameter 327.
327 = 0 Keys + and – are disabled (on the control, only the function “direct input of maximum speed
limitation” disabled).
327 = 1 Keys + and – are enabled
The E, +, - and >> keys on the control can be disabled using parameter 328.
328 = 0 The E, +, - and >> keys are disabled
328 = 1 The E, +, - and >> keys are enabled
Keys 1...4 on the V810 and 1...0 on the V820 can be disabled using one of the following parameters.
291 = 0 Keys 1...4 on control panel V810 are disabled.
292 = 0 Keys 1...0 on control panel V820 are disabled.
The F1 and F2 keys can be disabled using one of the following parameters.
293 = 0 The F1 key on the V810/V820 control panels is disabled.
294 = 0 The F2 key on the V810/V820 control panels is disabled.
Note
Key disabling can be undone after power On upon inputting the code number!
2
0
F-200
0
E
F
–
200 t1 050
0
0
F-200 t1 000
0
9
9
F-200 t1 500
9