Instruction manual

EFKA AB221A/AB321A + AB222A/AB322A (BA)

9. Press key +/– to select 10. Press the E key. The parameter

the 4th digit number is displayed.

4.3 Parameter Setting

4.3.1 Direct Selection of Parameter Number

1. Display after code number input 2. Press key >> 3. Press key +/– to select

at the programming level (1st digit blinks) the 1st digit

4. Press key >> 5. Press key +/– to select 6. Press key >>

(2nd digit blinks) the 2nd digit (3rd digit blinks)