Instruction manual

4.5 Assembling the connection cable, control panel, and diode illumination on the

machine head

–

A connection cable (1) is included in the delivery of all machines

that come with a positioning drive.

–

The operating panel (2) must be ordered separately (optional

equipment). When the operating panel is ordered, the thread

guide (3) is also included in the delivery.

The diode illumination (5) must also be ordered separately

(optional equipment). With it are delivered two types of holder

brackets. This allows you to choose between two different

mounting positions for the light. Position (5) is the home (starting)

position. Position (7) is used when a material guide is mounted

onto the sewing machine.

–

Take off the arm cover (9) and the valve cover from the machine

head.

–

Install the connection cable with the connector (1) as shown in the

illustration.

–

Mount the operating panel (2) with the thread guide (3). Install

cable (4) as shown in illustration.

–

Install lighting (5) and cable (6) as shown in illustration.

–

Lead the connection cables through the opening in the table plate

and fasten with the self-adhesive c lamp (8).