Instruction manual

4.4 Assembling the knee lever and oil pump hose

–

Use the hand lever to lift the sewing foot.

–

Tilt the machine head (1) to the rear.

–

Insert the shaft ( 3) into the lever (4).

–

Screw the screw (5) with the washer (6) into the shaft (3).

–

Press the hose (7) into the clamps (8) and pull on to the

strainer (9).

–

Reposition the machine head vertically and adjust the knee

lever (10) as shown in the illustration.

–

Align the knee cushion.

10°± 5°