Instruction manual

9.2 Lubrication

Caution: danger of injury!

Oil can cause skin eruptions.

Avoid protracted contact with the skin.

In the event of contact, thoroughly wash the affected area.

Caution!

The handling and disposal of mineral oils is subject to legal regulation.

Deliver used oil to an authorized collection point.

Protect your environment.

Take care not to spill oil.

Oil the sewing machine exclusively with the lubricating o il DA-10,or

equivalent oil with the following specifications:

–

Viscosity at 40°C 10 mm

–

Flash point 150°C

DA-10 is available from DÜRKOPP ADLER point of sale under the

following part numbers:

250-ml container: 9047 000011

1 litre container: 9047 000012

2 litre container: 9047 000013

5 litre container: 9047 000014

All areas in the machine head that must be lubricated with oil are

supplied from the central reservoir (1).

–

If the oil level falls below the “MIN” mark (3), you should re-fill

through the hole (2) until the level reaches the “MAX” mark.

–

Be sure to check the oil level daily!

Caution!

Oil should only be re-filled in the central reservoir or shuttle track.

Other places and points should not be individually lubricated.

Otherw ise, the oil could get into areas that are not supposed to be

lubricated.