Instruction manual

6.14 Operating the machine with the positioning drive

6.14.1 With the pedal

The pedal position is detected by a button with 16 different levels.

Their meanings are listed in the table below:

Pedal position Pedal movement Meaning

-2 Fully backwards Command for cutting the thread (end of seam)

-1 Half backwards Command for raising the sewing foot

0 Neutral rest position Refer to comment below

1 Slightly forwards Command for lowering the sewing foot

2 More forwards Sew with minimal speed (first level)

3 More forwards Sew with more speed (second level)

:::

13 Entirely forwards Sew with maximal speed (twelfth level)

Comment:

The following functions can be programmed to correspond with the rest

position:

–

needle position (down/up) and sewing foot position (down/up)

when stop in seam.

–

sewing foot position (up/down) after end of seam. (Pedal fully

backwards, then in rest position)

-2

-1