Technical data

Set-up instructions
Operating manual 806N Version 00.0 - 12/2012 91
6.3 Removing/mounting covers
The covers are divided into covers above and below the table level. The
covers above the table level must be removed in order to remove the
transport locks.
6.3.1 Removing the covers
Figure 62: Covers on the front side of the machine
Material damage due to incorrect sequence.
The covers above the table level can be damaged when removed/
installed in the incorrect sequence.
 ALWAYS remove/mount the covers above the table level in the
specified sequence.
ATTENTION
Material damage due to incorrect removal.
The covers above the table level are fastened with ball-heads that
can also damage the protective covers when incorrectly removed.
 NEVER use force to remove the covers above the table level.
ATTENTION
(1) - Edge folding station cover
(2) - Left side cover
(3) - Retaining bar
(4) - Front left cover
(5) - Carriage cover
(6) - Sewing head cover
(7) - Front right cover
(8) - Stacker cover







