Technical data

Operating instructions
86 Operating manual 806N Version 00.0 - 12/2012
Use only DA10 sewing machine oil or an equivalent oil conforming to the
following specifications:
• Viscosity at 40°C: 10 mm
2
/s
• Flash point: >160°C
DA10 sewing machine oil can be obtained from Dürkopp Adler sales
offices under the following part numbers:
• 9047 000013 - 2 liters
• 9047 000014 - 5 liters
Figure 61: Oil reservoirs in the 806N
Risk of injuries due to contact with oil.
Contact with oil can cause irritation, rashes, aller-
gies or skin injuries.
 ALWAYS avoid long-term contact with oil.
 ALWAYS thoroughly wash the affected areas if
contact with oil occurs.
WARNING
Risk of environmental damage from old oil.
Incorrect handling of old oil can result in severe
environmental damage.
 ALWAYS observe the legally prescribed regula-
tions for handling and disposal of mineral oil.
 Take care to ensure that oil is NEVER spilt.
ATTENTION
Oil reservoir 1 - on the sewing arm Oil reservoir 2 - under the sewing mate-
rial support