Technical data

Operating instructions
80 Operating manual 806N Version 00.0 - 12/2012
5.9 Switching off the machine
Switching off the machine needs two steps:
• Shutting down the operation display
• Switching off the machine
Step 1:
Shutting down
the operation
display
This is how you shut down the operation display:
1. Press the Exit button on the initial screen.
 The selection window appears on the touchscreen:
Figure 54: Exit selection window
2. Press the button for shutting down .
 The operation display shuts down. The screen becomes black.
The LED light on the screen changes its color from green to orange.
Other options
The other two buttons are explained in  Section 4.2.2 Operating soft-
ware functions.
Step 2:
Switching off
the machine
This is how you switch off the machine:
1. Check that the operating display has been shut down, see Step 1:
Shutting down the operating terminal.
2. Turn the main switch from the "I" position (2) to the left into the "O"
position (1).
 You will hear the residual air escaping.
The middle slide, edge folding frame, and transfer plate are lowered
slightly and become unpressurized.
Material damage due to incorrect sequence
If the operation display is not shut down first, this could result in the
malfunctioning or even the destruction of the operation display.
 ALWAYS shut down the operation display first. Do not flip the
main switch on the machine until you have done this.
ATTENTION