Technical data

Operating instructions
Operating manual 806N Version 00.0 - 12/2012 73
5.7.10 Setting the motor speed
The speed of the sewing motor can be set between 100 and 4000 rpm.
A speed reduction is useful when (e.g.) you want to sew stepwise or with-
out folding.
You set the motor speed as follows:
1. Navigate to Menu 2.
2. Press the Motor speed button .
 The following window appears:
Figure 47: Speed selection window
3. Press the buttons to set the sewing motor speed (value between 100
and 4000).
 The entered value appears in the input field above.
4. Press the Confirm button to confirm the entered value.
 The selection window closes and the entered value is displayed in the
field above the Motor speed button. The button is not highlighted in
green.
5. Press the Exit button to correct the entered value.
 The entered value is deleted.
6. Press the Exit button again to exit the selection window.
 The selection window closes and you are returned to the Menu 2
screen.
This setting remains stored after switching off the machine, after loading
a different seam program or after an EMERGENCY STOP.