Technical data

Operating instructions
70 Operating manual 806N Version 00.0 - 12/2012
2. Press the Automatic air suction button .
 The button is now highlighted in green. The air suction is now auto-
matically activated by interruption of the light barrier when the basic
part is laid in position.
3. Press the Automatic air suction button again to deactivate this
mode.
 The button is no longer highlighted in green. The air suction is no lon-
ger automatically activated, even when a light barrier is installed.
This setting remains stored after switching off the machine, after loading
a different seam program or after an EMERGENCY STOP.
5.7.7 Selecting/deselecting stacker variants
The stacker cleanly stores the finished sewn products. Two stacker vari-
ants can be selected:
Variant 1
In this variant the stack pivots towards the machine when stacking. This
variant is used in most cases. Variant 2 is recommended for use with very
slippery material.
Variant 2
With this variant the stack remains in the original position during stacking.
This variant is recommended when the material is very slippery. The static
loading reduces the danger of the sewn products slipping down after
stacking.
The stackers are switched off by default when the machine is supplied.
You select/deselect a stacker variant as follows:
1. Navigate to Menu 2.
2. Press button Stacker 1 or Stacker 2 .
 The button is now highlighted in green. After the next sewing cycle the
machine stores the finished sewn product using the stacker.
3. Press button Stacker 1 or Stacker 2 again to deactivate this
mode.
 The button is no longer highlighted in green. After the next sewing
cycle the machine does not store the finished sewn product using the
stacker.