Technical data

Operating instructions
Operating manual 806N Version 00.0 - 12/2012 69
 The button is now highlighted in green. The following message is dis-
played if the thread breaks while sewing:
Figure 45: Thread breakage error message
If the machine displays this error message then pleas proceed as
described in  Section 5.8.7 Sewing after thread breakage.
3. Press the Thread monitor button again to deactivate this mode.
 The button is no longer highlighted in green. A thread breakage while
sewing is NOT displayed.
This setting remains stored after switching off the machine, after loading
a different seam program or after an EMERGENCY STOP.
5.7.6 Activating automatic air suction
The automatic air suction is an optional extra that does not need to be
additionally activated with Manual button 1. It is automatically activated
via a light barrier when this is interrupted by the seam material.
Area of
application
The automatic air suction is more suited for use with heavy material. This
allows the position to be corrected after fastening with the air suction. This
is difficult with light material because it pulls out of shape when correcting
the position under active air suction. A correctly sewn pocket is then no
longer possible.
You activate the automatic air suction as follows:
1. Navigate to Menu 2.