Technical data

Operating instructions
64 Operating manual 806N Version 00.0 - 12/2012
7. Press the Exit button to exit the Bobbin menu.
 You are returned to Menu 1.
Changing the
bobbin
You change the bobbin as follows:
You can change the bobbin from the Bobbin menu screen. This proce-
dure is described in  Section 5.2.5 Inserting/changing the bobbin.
5.6.3 Enabling bundle removal
You must enable the bundle removal when you want to remove the sewn
parts. The stacker opens and allows the parts to be removed.
You enable bundle removal as follows:
1. Press the Enable bundle removal button .
 The button is now highlighted in green.
The stacker bar opens.
2. Remove the finished products.
3. Press the Enable bundle removal button again.
 The stacker bar closes again.
The button is no longer highlighted in green.
5.6.4 Automatically activating the slide at the front
The middle slide is directly forward at the start of a new sewing cycle.
It does not need to be brought forward with Manual button 1.
Activating You activate the Slide automatically forward mode as follows:
1. Press the Slide automatically forward button .
 The button is now highlighted in green and the Slide automatically for-
ward mode is activated.
2. Press the Slide automatically forward button again to exit this
mode.
 This exits the mode. The button is no longer highlighted in green.
This setting is deleted after switching off the machine, after loading a dif-
ferent seam program or after an EMERGENCY STOP.