Technical data

Operating instructions
Operating manual 806N Version 00.0 - 12/2012 63
Bobbin counter You set the bobbin counter in the Bobbin menu screen as follows:
1. Press the Number of stitches button .
 The following window appears:
Figure 44: Selection window for number of stitches
2. Press the buttons to enter the (estimated) number of stitches avail-
able on the bobbin.
 The entered value appears in the input field above.
Bobbin capacity
The capacity of the bobbin varies depending on the type of thread and
material to be sewn. The number of stitches to be entered must therefore
be estimated. The experience gained by sewing a given product will
allow you to gradually approach a more accurate estimate of the bobbin
capacity.
3. Press the Confirm button to confirm the entered value.
 The selection window closes and the entered value is displayed in the
field above the Number of stitches button. The button is not high-
lighted in green.
4. Press the Exit button to correct the entered value.
 The entered value is deleted.
5. Press the Exit button again to exit the selection window.
 The selection window closes and you are returned to the Bobbin
menu screen.
6. Press the Stitch counter button .
 The stitch counter adopts the entered stitch value. The number is dis-
played in the field above the button. The stitch counter counts down,
i.e. it displays the number of stitches remaining.