Technical data

Operating instructions
62 Operating manual 806N Version 00.0 - 12/2012
5.6.2 Setting the bobbin counter
The bobbin counter indicates the amount of thread remaining on the bob-
bin. The menu for changing the bobbin is also displayed here.
You access the bobbin counter and bobbin change menu as follows:
1. Press the Set bobbin counter button .
 The machine enters the Safe stop mode, the inner stacker bar opens
and the following dialog is displayed:
Figure 43: Bobbin menu dialog
This dialog opens automatically when the stitch counter reaches "0". The
machine enters the Safe stop mode and you have two possible courses
of action:
• Enter a new number of stitches if the bobbin is not yet empty
(see below)
• Change the bobbin if it is actually empty  Section 5.2.5
Inserting/changing the bobbin.