Technical data

Operating instructions
Operating manual 806N Version 00.0 - 12/2012 61
Figure 42: Menu 1 in 2-pocket mode
 The Start key lights up green. You are asked to specify the first
pocket to be sewn in the next sewing cycle.
7. Select the first pocket to be sewn by pressing the desired pocket.
 The pocket is highlighted or framed.
8. Start the sewing process by pressing the Start button.
 The machine starts a normal sewing cycle. It automatically alternates
between the two pockets while sewing.
9. To sew the pocket that is not currently highlighted: Manually select the
desired pocket by pressing it after a sewing cycle.
5.6 Setting options in User interface 1
Settings in Menu 1 can only be performed between two sewing cycles.
The buttons are greyed-out and cannot be pressed when the machine is
active. Activated buttons are highlighted in green.
5.6.1 Resetting piece counter
The piece counter counts the number of sewn pockets (or the number of
sewing cycles performed). It can be reset at any time between two sewing
cycles.
You reset the piece counter as follows:
1. Press the Reset piece counter button .
 The piece counter is reset to "0".
It starts counting again after the next sewing cycle.