Technical data

Operating instructions
58 Operating manual 806N Version 00.0 - 12/2012
Stacker inactive If the machine is not stacking the material to be sewn, then a stacker
is probably not activated. You can activate a stacker in menu 2,
 Section 5.7.4 Selecting/deselecting stacker variants.
Additional
equipment
Laser positioning aid
A laser positioning aid for the 806N is available as an optional extra.
It facilitates exact alignment on the material support when the basic part
is being applied.
5.5 Sewing in two-pocket mode
In addition to the 1-pocket mode,  Section 5.2.1 Making the basic set-
tings, the 806N can also work in 2-pocket mode. This allows you to use
different seam programs to alternately sew right and left pockets on a shirt
or trousers.
You can access the 2-pocket mode as follows:
1. At the bottom left of the initial screen, press the Reference machine
button .
 The button changes and indicates that the machine is operating;
the Start key is flashing in green.
The machine scans the numeric code on the transfer plate in order to
identify it. It then moves to the basic position.
The selection window for the pocket mode appears on the touch-
screen.
Figure 38: Selecting the pocket mode
1-pocket mode
2-pocket mode