Technical data

Operating instructions
46 Operating manual 806N Version 00.0 - 12/2012
1. Pull off the hose from the hose connecting piece (5) in an upwards
direction.
2. Unscrew the screw handle (2) to the left until the coupling strip (4) can
be released from the edge folding frame.
 The coupling strip (4) can be lifted from the edge folding frame.
3. Raise the rear carriage (1) on the right and left side such that the
pins (3) on the edge folding frame stand free.
4. Pull out the edge folding frame towards you.
 The edge folding frame has now been removed.
5. Now remove the middle slide.
Middle slide This is how you remove the middle slide:
Figure 28: Removing the middle slide
1. Remove the edge folding frame.
 The middle slide can now be easily reached.
2. Raise the carriage (6) to the rear such that the pins (7) on the middle
slide stand free.
3. Pull out the middle slide towards you.
 The middle slide has now been removed.
4. Now remove the hose insert.
(6) - Carriage for the middle slide
(7) - Middle slide pins

