Technical data

Operating instructions
Operating manual 806N Version 00.0 - 12/2012 45
 The transfer plate moves into the basic position.
Middle slide and edge folding frame are lowered towards the front at
the bottom and become unpressurized; at the same time, the locking
mechanisms are automatically released.
The secure stop light lights up.
You have now initiated the change of shape. You can now:
• Change the shaping assembly; continue with step 1, removing
the shaping assembly.
• Insert the shaping assembly; continue with step 2, inserting the
shaping assembly.
Step 1:
Removing
the shaping
assembly
Remove the shaping assembly components in the order specified here.
You will then achieve a correct change of shape.
Edge folding
frame
This is how you remove the edge folding frame:
Figure 27: Removing the edge folding frame
(1) - Edge folding frame carriage
(2) - Screw handle
(3) - Edge folding frame pins
(4) - Coupling strip
(5) - Hose connecting piece




