Technical data

Operating instructions
32 Operating manual 806N Version 00.0 - 12/2012
5.1 Switching on the machine
The machine is switched on through the compressed air shut-off valve and
the main switch, which are both located centrally under the material sup-
port.
This is how you switch on the machine:
1. Turn the shut-off valve to the right into the vertical position.
Figure 15: Opening the shut-off valve
 The compressed air flows into the hoses.
Risk of crushing due to pneumatic parts.
The use of compressed air produces strong forces
on the moving parts. If your fingers or hands get in
between the parts, this could result in minor to mod-
erate injuries.
 NEVER reach into the area of moving parts.
CAUTION
Shut-off valve closed Shut-off valve open