Technical data

806N device description
28 Operating manual 806N Version 00.0 - 12/2012
Setting options on user interface 2
The respective section of the operating manual, where you can find further
information on the buttons, is also specified.
Button Function
Work step by step,  Section 5.7.1
The machine advances only step by step, which is useful for
sewing-in operations or a test run.
Activate sewing without edge folding,  Section 5.7.2
Useful for testing the sewing head settings.
Switch on/off stroke position,  Section 5.7.3
The stroke position is the clearance between the foot and
the sewing material support.
Activate needle cooling,  Section 5.7.4
Cools the needle, which is heated by the friction on the
fabric. Standard equipment, which can be enhanced.
Activate thread monitor,  Section 5.7.5
It notices when the needle thread tears and issues
a corresponding error message.
Activate automatic air suction,  Section 5.7.6
Additional equipment; air intake is automatically activated
by a light barrier.
Select/deselect stacker variant 1,  Section 5.7.7
Selection of one of the two stacking variants.
Select/deselect stacker variant 2,  Section 5.7.7
Selection of one of the two stacking variants.
Set outfeed roller path,  Section 5.7.8
Distance the fabric is to be rolled out of the sewing field
before it is ejected.
Activate advance roller,  Section 5.7.9
Additional equipment, required for very short seam material,
e.g shorts.