Technical data

806N device description
Operating manual 806N Version 00.0 - 12/2012 27
User interface 2 From User interface 1, you use the Global parameters button to
access User interface 2. You can make further settings here.
Figure 12: Overview of user interface 2
Enable bundle removal,  Section 5.6.3
Allows the finished sewn parts to be removed from the
stacker.
Automatically activate slide at front,  Section 5.6.4
The middle slide immediately moves to the front position.
It does not have to be brought to the front by manual key 1.
Activate strip alignment,  Section 5.6.5
After the edge folding process, the machine stops in order to
check the alignment of the pocket blank.
Initiate shape change,  Section 5.6.6
The change of a shape assembly is initiated.
Button Function
(1) - Select setting options (see table below)
(2) - Access the technician's user interface (with password)
(3) - Exit User interface 2 (go to User interface 1)


