Technical data

806N device description
26 Operating manual 806N Version 00.0 - 12/2012
User interface 1 You go to this user interface by selecting the seam program. You can view
here the seam shape and how the pocket is to be sewed on and make var-
ious settings.
Figure 11: Overview of user interface 1
Setting options on user interface 1
The respective section of the operating manual, where you can find further
information on the buttons, is also specified.
Button Function
Reset piece counter,  Section 5.6.1
It indicates the number of sewn-on pockets.
Set bobbin counter,  Section 5.6.2
It indicates the amount of thread still on the bobbin and
opens the bobbin change menu.
(1) - Display of the seam shape of the pocket seam program
(2) - Set global parameters (in User interface 2)
(3) - The designation contains the version number of the software
(4) - Select setting options (see table below)
(5) - Exit user interface 1 (go to start screen)




