Technical data

806N device description
Operating manual 806N Version 00.0 - 12/2012 25
Pocket mode
selection
window
On the Start screen, you use the Reference machine button , to
access this selection window after performing a successful reference run.
You can select the pocket mode here – to specify whether only the right
or left pocket is to be sewn or whether the right and left pocket are to be
sewn alternately.
Figure 9: Overview of the Pocket mode selection window
Seam program
selection
window
You automatically go to this selection window by selecting a pocket mode.
The identification code of the transfer plate is displayed here, see also
 Section 5.2.6. All pocket seam programs are listed correspondingly.
You can select here the seam program to be used for sewing.
Figure 10: Overview of the Seam program selection window
(1) - Select one-pocket mode
(2) - Select two-pocket mode
(3) - Exit the Pocket mode selection window
(go to the Start screen)



(1) - Selection area with list of selectable pocket seam programs
(2) - Display of the selected seam program
(3) - Confirm selection
(4) - Display of the transfer plate identification code
(5) - Exit selection window (to go to pocket mode selection window)




