Technical data

806N device description
24 Operating manual 806N Version 00.0 - 12/2012
4.2.2 Operating software functions
The functions of the individual user interfaces are described in this section.
The technician's user interface is not included, since a password is
required for access. The technician's user interface is described in the
 Service manual for the 806N.
Initial screen When you switch on the machine,  Section 5.1, Switching on the
machine, the Start screen appears. On this user interface you can:
• Reference the machine (diagnostic run for reading the code of
the transfer plate and finding the home position) and, in this way,
access the pocket mode selection window
• Access the technician's user interface by entering a password
• Exit the operating software or shut down the operating terminal
 Section 5.9, Switching off the machine.
Figure 8: Overview of the start screen
(1) - Display of the current date and time
(2) - Access the technician's user interface (with password)
(3) - Reference machine
(4) - Exit operating software or shut down operating terminal



