Technical data

806N device description
Operating manual 806N Version 00.0 - 12/2012 23
4.2 Software description
The operating terminal is used to control the machine. You can operate
the operating software on the touch screen of the operating terminal.
The following is described below:
• Structure of the operating software
• Operating software functions
4.2.1 Structure of the operating software
The operating software is set up on different user interfaces. The structure
ranges from the start screen to the technician's user interface.
An overview of the operating software is displayed here. The arrows indi-
cate the navigation options between the user interfaces:
Figure 7: Overview of the operating software structure.
Designation Meaning in the work sequence
Initial screen Basic view of the operating software
Pocket mode selection
window These two selection windows are used to prepare the
machine for sewing work,  Section 5.2.1, Making basic
settings.
Seam program
selection window
User interface 1 The operator mainly works on these user interfaces when
sewing. Various machine settings can be made here.
User interface 2
Technician's user
interface
Password required, for technicians only
User interface 1
User interface 2
Technician's user
interface
Initial screen
Pocket mode
selection window
Seam program
selection window